- Видео 263
- Просмотров 4 685 798
EDELRID
Германия
Добавлен 12 июл 2010
For over 160 years, we've embraced climbing in all its forms, from rock to ice and everything in between. We believe in pushing boundaries, staying curious, and sharing the joy of the vertical world.
Join us as we evolve our gear and solutions for climbers and professionals alike.
Our vision: We bring ideas to life that enable free movement in the vertical world.
#VerticalFreedom #EDELRID
Join us as we evolve our gear and solutions for climbers and professionals alike.
Our vision: We bring ideas to life that enable free movement in the vertical world.
#VerticalFreedom #EDELRID
Discover the Alpine World Through Via Ferrata | EDELRID
Via ferratas offer a unique allure, with winding paths, steep rock scrambling, and a blend of pleasure and sporty challenges.
It's about experiencing and sharing moments, being in nature, mastering exposed passages, and enjoying breathtaking views without safety concerns.
Explore our wide range of via ferrata products here: edelrid.com/eu-en/sport/via-ferrata-shop
It's about experiencing and sharing moments, being in nature, mastering exposed passages, and enjoying breathtaking views without safety concerns.
Explore our wide range of via ferrata products here: edelrid.com/eu-en/sport/via-ferrata-shop
Просмотров: 665
Видео
MEGAWATT Application: Ascending and Descending | EDELRID
Просмотров 1,7 тыс.Месяц назад
Johnny Korthuis, ISA-certified arborist and rope access technician, explains the features and technical details of the MEGAWATT. The EDELRID MEGAWATT is a universal descender device for industrial climbers and rescue operations with a payload of up to 230 kg. The intelligent transmission mechanics of the descent lever facilitate a large operating range and exact adjustment of the speed at minim...
MEGAWATT Application: Positioning | EDELRID
Просмотров 990Месяц назад
Johnny Korthuis, ISA-certified arborist and rope access technician, explains the features and technical details of the MEGAWATT. Chapters: 00:00 - 00:25 Introduction 00:26 - 03:04: V-positioning 03:05 - 03:47: Technical specifications The EDELRID MEGAWATT is a universal descender device for industrial climbers and rescue operations with a payload of up to 230 kg. The intelligent transmission me...
How to Use: SWITCH PRO ADJUST | EDELRID
Просмотров 3,8 тыс.3 месяца назад
Learn how to use our SWITCH PRO ADJUST, our adjustable lanyard for positioning yourself and traversing on a structure. Application shown in the video: - Length adjustment while not under load - Locking the device - Release the device under (full) load What is the SWITCH PRO ADJUST? It is a versatile lanyard solution ideal for self-belaying, positioning, and smooth progression on structures, anc...
OHM 2nd Generation: How to Use | EDELRID
Просмотров 32 тыс.3 месяца назад
Our latest iteration of the new OHM builds upon the success of the innovative OHM, now more user-friendly with significant updates. Key features discussed in this video: - Integrated swivel - Improved activation - Safe from the 1st quickdraw - Weight difference compensation Chapters: 00:00 Intro 01:16 Product features 02:18 Integrated swivel and device (de)activation 02:40 Advantages and gettin...
How to Approach Your New PPE Product? | EDELRID Knowledge Base
Просмотров 1,9 тыс.3 месяца назад
What do you do when you buy a new PPE product? Let's be honest. Most people purchase a new PPE device, toss the user manual aside and jump straight into action. But, how should we actually proceed to safely familiarize ourselves with all its functions? In this video, we provide a detailed guide for the safe and step-by-step learning of these functions. From carefully reviewing the user manual t...
PINCH the Talk with Johnny Korthuis | EDELRID
Просмотров 8 тыс.4 месяца назад
We took advantage of Johnny Korthuis's recent visit, seating him with Daniel, Head of Innovation at EDELRID, to discuss the creation history of the PINCH. Dive into the full unfiltered conversation with Johnny and Daniel - an exclusive, behind-the-scenes glimpse into the making of our innovative product! Chapters: 00:00 - 03:45 Introduction 03:45 - 06:29 Brake assistance and geometry 06:30 - 10...
Friendship High Above | EDELRID
Просмотров 1,9 тыс.4 месяца назад
"Pierre - Papier - Ciseau" Nothing like a good game of rock-paper-scissors on a portaledge to make a decision without overthinking it... Too bad Siebe always loses! ;-) In big-wall climbing, it's not easy to find a partner who shares the same goals as you, with whom things happen quickly, smoothly, without even having to speak. A partner who is organized, climbs quickly, handles rope management...
PINCH Multipitch Tutorial | EDELRID
Просмотров 19 тыс.4 месяца назад
Introducing the PINCH - an all-around brake-assisted belay device ideal for single rope multi-pitch climbing. In this video Daniel, Head of Innovation at EDELRID, demonstrates how to utilize the PINCH for multi-pitching on single ropes. Chapters: 00:00 - 00:23: Introduction 00:24 - 01:03: Belaying a lead climber 01:04 - 02:00: Belaying a second 02:01 - 02:23: 90° steps of orientation 02:24 - 02...
PINCH for Work Safety & Rope Access | EDELRID
Просмотров 6 тыс.4 месяца назад
PINCH for Work Safety & Rope Access | EDELRID
The Standard EN 16716 for Avalanche Airbag Systems | EDELRID Knowledge Base
Просмотров 6104 месяца назад
The Standard EN 16716 for Avalanche Airbag Systems | EDELRID Knowledge Base
Cut Resistance of Ropes: Part 3 | EDELRID Knowledge Base
Просмотров 1,9 тыс.4 месяца назад
Cut Resistance of Ropes: Part 3 | EDELRID Knowledge Base
Nachsichern und Simultanklettern mit einer Rücklaufsperre | EDELRID Knowledge Base
Просмотров 4,4 тыс.8 месяцев назад
Nachsichern und Simultanklettern mit einer Rücklaufsperre | EDELRID Knowledge Base
EDELRID Knowledge Base - Rope Kink Test
Просмотров 2,6 тыс.10 месяцев назад
EDELRID Knowledge Base - Rope Kink Test
Out of the Valley: Trenkwalder #VerticalFreedom | EDELRID
Просмотров 4,8 тыс.11 месяцев назад
Out of the Valley: Trenkwalder #VerticalFreedom | EDELRID
Seilverbindungsknoten: ein Vergleich | EDELRID Knowledge Base
Просмотров 3,9 тыс.Год назад
Seilverbindungsknoten: ein Vergleich | EDELRID Knowledge Base
SHAPELESS: A Canyoning Film Supported by EDELRID
Просмотров 1,2 тыс.Год назад
SHAPELESS: A Canyoning Film Supported by EDELRID
Handling the Fear with Molly Mitchell #VerticalFreedom | EDELRID
Просмотров 1,5 тыс.Год назад
Handling the Fear with Molly Mitchell #VerticalFreedom | EDELRID
Applied Physics with Bernd Arnold #VerticalFreedom | EDELRID
Просмотров 1,8 тыс.Год назад
Applied Physics with Bernd Arnold #VerticalFreedom | EDELRID
Elastics on Harness Leg Loops | EDELRID Knowledge Base
Просмотров 4,6 тыс.Год назад
Elastics on Harness Leg Loops | EDELRID Knowledge Base
Correct Base Position When Using Semiautomatic Belay Devices | EDELRID Knowledge Base
Просмотров 3,6 тыс.Год назад
Correct Base Position When Using Semiautomatic Belay Devices | EDELRID Knowledge Base
We Pull Together: A Sustainable Collaboration with NEWSEED | EDELRID
Просмотров 994Год назад
We Pull Together: A Sustainable Collaboration with NEWSEED | EDELRID
Collection 2023 #VerticalFreedom | EDELRID
Просмотров 1,6 тыс.Год назад
Collection 2023 #VerticalFreedom | EDELRID
Kurzschluss-Problematik bei Klettersteigsets | EDELRID Knowledge Base
Просмотров 15 тыс.Год назад
Kurzschluss-Problematik bei Klettersteigsets | EDELRID Knowledge Base
Kürzen und Versiegeln unterschiedlicher Seiltypen | EDELRID Knowledge Base
Просмотров 8 тыс.Год назад
Kürzen und Versiegeln unterschiedlicher Seiltypen | EDELRID Knowledge Base
EDELRID Athlete Meeting 2022: Elbe Sandstone Mountains
Просмотров 28 тыс.Год назад
EDELRID Athlete Meeting 2022: Elbe Sandstone Mountains
Hello, In my case, I have the FLEX PRO harness, which I find incredibly comfortable. However, it does not have a ventral anchor point. Due to my work in the wind energy industry, we in the industry like to use the double hook on the dorsal ring of the harness. The positioner, I could use it on the "ears" of the harness or the lateral rings, but I do not find it as comfortable or I had simply gotten used to using the work line on the ventral ring. With this harness, I lost that possibility and used the position line on the two green fabric rings: the pectoral ring (A). A colleague saw me doing this and stopped my activity, saying that what I was doing was reckless because this pectoral anchor point should NEVER be used for positioning. Is this true? Thank you very much for your attention. Also, thank you for your products. The best harness I have ever used has been yours, and I will use it until it wears out to buy another one from you. Best regards.
The dorsal and sternal attachment points (EN 361) are only for fall arrest systems and not for positioning. Only the lateral attachment points (EN 358) may be used for positioning on the FLEX PRO. For further information please visit: avs.edelrid.com/images/attribut/54594_GAL_FlexPro_FlexProPlus_PART_I_PART_II_ANSICHT.pdf
Hello, @@edelrid Thank you for your response. I appreciate the clarification regarding the usage of the dorsal and sternal attachment points on the FLEX PRO harness. However, I would like to bring to your attention some information from your own documentation which seems to present a different perspective. In the document titled "54594_GAL_FlexPro_FlexProPlus_PART_I_PART_II_ANSICHT," on page 34, point 11 (STERNAL), it states: "The sternal attachment may be used as an alternative fall arrest attachment in applications where the dorsal attachment is determined to be inappropriate by a competent person and where there is no chance to fall in a direction other than feet first. ACCEPTED PRACTICAL USES FOR A STERNAL ATTACHMENT INCLUDE, BUT ARE NOT LIMITED TO, LADDER CLIMBING WITH A GUIDED TYPE FALL ARRESTER, LADDER CLIMBING WITH AN OVERHEAD SELF-RETRACTING LIFELINE FOR FALL ARREST, ****WORK POSITIONING**** AND ROPE ACCESS. The sternal attachment may also be used for travel restraint or rescue. When supported by the sternal attachment during a fall, the design of the FBH shall direct load through the shoulder straps supporting the user and around the thighs. Supporting the user, post fall, by the sternal attachment will result in roughly a sitting or cradled body position with weight concentrated on the thighs, buttocks, and lower back. Supporting the user during work positioning by this sternal attachment will result in an approximate upright body position. If the sternal attachment is used for fall arrest, the competent person evaluating the application should take measures to ensure that a fall can only occur feet first. This may include limiting the allowable free fall distance. It may be possible for a sternal attachment incorporated into an adjustable style chest strap to cause the chest strap to slide up and possibly choke the user during a fall, extraction, suspension, etc. The competent person should consider FBH models with a fixed sternal attachment for these applications." Based on this, it appears that your own documentation allows for the use of the sternal attachment point for work positioning under certain conditions. This seems to contradict the guidance provided in your recent response. Perhaps, as often happens, personal preferences or ideas are being turned into dogma? Or perhaps the document you yourself cite is incorrect and Edelrid drafted it without taking into account the EN 361 standard, which specifies the requirements, test methods, usage instructions, marking, and packaging for fall arrest harnesses. Could you please provide further clarification on this discrepancy? It is crucial for those of us in the wind energy industry to understand the correct and safe use of the harness to ensure our safety and compliance with industry standards. Thank you once again for your attention and for producing such reliable equipment. I look forward to your clarification. Best regards,
I'm Korean, where can I buy this
It's written on the website... 'BUY ONLINE' "The product you selected is not available at partnered online shops in your country" Can't I buy it in Korea?
Got my Ohm II few days ago. As a heavy climber (roughly around 100kgs) owning Ohm II widens range of people who can belay me without hurting me or them. Thank you Edelrid :)
You have the data for this in a table or short write up? You seem to blow past a pretty decent correlation of strength and cut resistance but without knowing what was actually cut it isn’t possible to see if that is just a material difference. Making the data available would be very helpful and interesting
Please click on our video description :) there you'll find links to other videos within this series, as well as relevant Knowledge Base articles.
@@edelrid I did not see the raw data from this video saying what the rope construction or type was for each test here. Maybe a table like that has been added since or maybe I missed it? Where can I find the data from this specific test saying the rope or rope material and the cutting length? Basically where would I see the number you used to make the plots in this video?
фриц 😊
Looks really good
Schrecklich!
Since Tommy Caldwell had a Finger in the development of the pinch, could we please get a video of him using it? (No disrespect to mr. Gebel, I'm a big fan of Daniel as well)
Concerns about random opening if clipped directly to the belay loop or anchor should not be dismissed. In a longer 45 minute video, the interviewer casually opens and removes a loaded but unweighted Pinch from a belay loop, simply by giving an inch of slack to the loop. No 90 degree rotation needed, and worse, earlier prototypes were revealed to have had a more typical three-step release protocol, but they dropped it as too complicated - even though the UIAA has vigorously pressed for two and three-step locking biners in belay applications. I've lost half a dozen acquaintances in the past two years, in mostly avoidable circumstances, and I am tired of memorials without anything learned. If a rare sequence of events can happen, given enough user hours, it WILL happen, and some belayer messing with their anchor will manage to unclip a loaded Pinch, and watch it go skittering out of reach, a now unbelayed and clueless climber on the other end of the rope. Immediate recall, or certain lawsuits - their choice.
OMG, spent an hour searching for exactly the evidence at 36:30, where he casually opens the device merely by giving an inch of slack to the belay loop, no special rotations needed. Perhaps more future evidence, at 20:45, he describes their earlier design, with a three-step maneuver to open, and says "It was safer, because of the three-way movement, but cancelled that . . .because it was too complicated." This may become crucial, because at the same time the UIAA has been pushing for more acceptance of two or three-step locking biners for belaying. In the early days of my 55 year climbing career, in my climbing shop job we'd listen to reps touting every new gizmo, and the minute one would describe anything as "foolproof," we'd jump to prove them wrong - find the flaw or weakness. This is actually a vital process, in debugging anything; manufacturers may test and test, but only after thousands of user hours do sequences line up, where a potential danger is discovered. Given enough time, "rare" events will begin to occur, and may result in predictable, hence avoidable accidents. Two friends experienced one of the first mysterious carabiner failures, that eventually led to the theories of oscillation of a weighted moving rope, vibrating the gate open during a long fall - and the shift to wire gate and keylock designs to reduce this phenomenon. It's not a stretch to imagine a climber at a stance, fiddling with the belay while the rope is not under tension, and having the loaded Pinch device detach itself from a harness or fixed anchor, and go swinging out of reach with a now unbelayed climber unawares. The cardinal rule of any "rare" event is: If it can happen, it WILL happen.
Has the product been released? There's no way to buy it.
Depending on your location, it should be restocked at local retailers and online by this summer. 🙂
EN?
Find the english version here: ruclips.net/video/5kF8ucxC49A/видео.htmlsi=QzYbaZNWkKSSOE05
Welche Wette hat der liebe Daniel verloren? :D Danke für den Einsatz!
Dass das Seil im Labor reißt ist beim Abseilen unbedeutend, unrealistisch. Sonst schönes Video. Danke!
i like. any feedback from the tree people? could it resist light touches with a handsaw blade?
your mom called. she wants her tiger theme pyjama pants back!
Come on, they're cheetah!
I think it could be very interesting for Lead Rope Solo Climbing and/or Top Rope Solo Climbing
We have one, and it's like Grigri on steroids. It's extra smooth, offering flexibility and accommodating both light and heavy users (with a difference of +25kg).Additionally, it is certified for rope access, ensuring it meets all necessary safety standards for professional use
product is great...except for rappelling. It is extremelly not fluid.
Euch ist schon klar das es keine gute Werbung ist. Ich mein ihr verkauft es ja in eurem Shop als Sicherungsmittel…… aber jut, kauf ich halt andere Hersteller
Es handelt sich in diesem Beitrag um Schlingen nach EN 566, die von allen Herstellern nicht zur Energieaufnahme geeignet sind. Speziell für die Anwendung als Selbstsicherung mit dynamischer Reserve gibt es Selbstsicherungen nach EN 17520. Bei uns erhältlich: edelrid.com/de-de/sport/verbindungsmittel-shop
EN 12841-C is crossed out on the box in which it is packed!?
The PINCH has been successfully certified according to EN 15151-1 (braking devices with manually assisted locking) and EN 12841-C (rope adjustment device). However, certification according to EN 12841-C (descender) could not be implemented in time for the start of the first production batch because of organizational reasons. If you bought a device and would like to return it, please contact us via the contact form on our website. We apologize for any inconvenience.
@@edelrid will the next batch include the EN 12841-C (descender) certification ?
@@fredericohsilva For further production, the implementation of certification according to EN 12841-C is now ensured. We currently plan to have PINCH with EN 12841-C available in stores during Q3 2024.
Not soon enough :(
Bin mit vielen Edelrid Produkten sehr zufrieden ! Aber wieso gibt es kein deutschsprachiges Video ?
"In recent episodes" lol parts 1&2 were 4 years ago. But thanks for the awesome tech developments!
Better late than never!
What kind of rope bag are you using while rappelling?
That would be our TILLIT multipitch rope bag! ➡edelrid.com/eu-en/sport/backpacks-and-rope-bags-shop/tillit
3:03 Why do you rappel on a single point?
Is this rhetorical?
Praise the Lord!
I got mine today!!!!!!!!! I love it!!!!!
I want one of these even though I can sort of use a grigri to do similar stuff, it seems WAY more dangerous than this. Though this is like 2.5x the price.
There are a lot of other descenders that have similar functionality and are a bit safer than a grigri. Many of them are not as expensive as the megawatt, you can check out the Petzl Rig, it doesn't have as many features as this, but it works pretty well, especially if you're used to the gri gri.
The MEGAWATT is primarily a descender for rope access and this is its main area of application. However, it can also be used as a belay device for sports climbing. See our homepage and the user instructions for further information. 😊
Why is this substantially different to a grigri?
What a substantially ignorant question.
Oh, and the megawatt is designed for professional rope access and arborism, not for sport.
One big difference is that it can be opened and closed without touching the biner
@@NatetheAceOfficial Usually why people ask questions, you don't start out by default knowing everything.
💯👍🙌
Great device! Love using it (so far :)
If you fall at the first bolt or above after clipping the Ohm... Can you fall in to the OHM 2?
Warum nicht in deutsch? Und das als deutscher Hersteller.. traurig
What about lead ropesoloing? Or at least Topropesoloing? Any use for that?
We are currently in the process of evaluating the PINCH for rope soloing. For the current status, please refer to our user manual: avs.edelrid.com/images/attribut/54692_GAL_Pinch_ANSICHT_DINA4_Homepage.pdf
Congratulations, you guys have just invented a grigri. Moreover, it does not even cover the main grigri flow - it is still intuitive to disable autoblock with one hand, pull the slack with the upper hand, while letting go the lower hand.
Vielen Dank für das Video. Aber eine Frage habe ich trotzdem noch. Handelt es sich bei den getesteten Polyamid Schlingen um die Edelrid PES SLING 16MM oder um eine andere? Die Angabe, dass die Schlinge 16mm breit ist, lässt das vermuten allerdings ist mein Verständnis das Polyester und Polyamid nicht das gleiche sind.
Die Werte beziehen sich auf ein Schlinge mit der Produktbezeichnung Tubular Sling 16 mm, die jedoch nicht mehr im aktuellen Sortiment enthalten ist. Wie angegeben, handelt es sich um eine Polyamidschlinge.
@@edelrid Ah das macht Sinn. Und zu welcher Kategorie würden dann die Polyester Schlingen gehören?
People were crazy about Eddie because the direction of the rope was opposite to that of Grigri. But will Finch follow Grigri's shortcomings again?
Top Video
Absolutely not until you add a twist screw or pull pin to physically lock the gate side.. Respectfully -Actual Tower Specialist/Rope Access rescuer.. *A 30 cent captive screw and tapping a threaded hole for 50 cents would make this device ridiculously safer. As is, seems like someone will "pinch" it during a panicked fall and open it, and you're just hoping the rope keeps your "gate safety" from letting it open, but on a weighted rope or side loaded fall I can foresee a world where the gate walks itself off the rope in that or similar situation of accidentally engaging that button.
If you're concerned about it opening, you could just put a carabiner through the attachment loop. That way it's being physically blocked from opening.
Dear God this is Death -15 year Radio Tower Specialist *@Edelrid you should add a little spring loaded pull pin on the gate so it can't swing open unless you pull the pin to release the swinging side while simultaneously pushing the button. To preserve the ability to make it a one handed operation, the pull pin could have an added feature where you pull to release the gate, but you can pull then twist the pin to lock it in the open position. Relying on the rope to be what prevents the gate from swinging open should the button get depressed means you're now also relying on the stiffness and diameter of the rope in addition to the weight on the rope which might actually make it easier to flip the gate off the rope, or if its taking a side loaded fall and needs the rope to save the day because now your alignment to make the feature even work is gone on a side loaded fall with a panicked person death gripping and squeezing the button. PLEASE add a secondary lock feature that requires the user to enact a force to the device which is opposite of the button. IE you need a force from the left to push the button, you need a force from the right to pull the pin.. no nobody will death grip it during a fall and open it, or side load it, button pops and the gate bypasses the rope and swings open.. But hey, I would love to play with one if youll send me one to test and send you some ideas.
Hey Johnny, we met at MLR's Vertical Expo. Funny I just found your Video after ordering my Edelrid Treerex & Chest harness today. 😀
hat leider keine 140g im Grosse M nur 181g mit beutel
That cutting length vs breaking strength graph looked suspiciously like a linear relationship for it to be dismissed so quickly.
That stands out to me as well. Makes it feel a little cherry picked and makes the jump to 160kg “to better compare” seem a little suspicious too. Perhaps the description links to a write up though where it is more clear. I am not say they had pre decided the conclusion and worked build evidence for that. Just that from the video alone some choices are a little clunky. Will look for a write up now
Has the issue of Eddie's slow autobrake response been resolved?
I'm curious what would be the best rope for rope access climbing work
When do you release it?
It was released earlier this year!
@@edelrid isn´t this the Edelrid Pinch?. I mean, when will it be released to the public to be bought
@@hotomahotoma584 yes :) depending on your location, it should be restocked again on our website and across various retailers from this summer!
How is it different from "eddy"?
Great question! At EDELRID, we strive to continuously improve our climbing gear to correspond to the latest technologies materials and developments in the markets. For example, one innovative technology of the PINCH is the option for direct attachment to the harness which the EDDY does not feature, amongst other major differences between the belay devices.
Well made video, impressive demonstrations and gratefully explained to me
We appreciate your feedback!
When will it be available?
Depending on your location, it should be restocked by summer!